Please use this identifier to cite or link to this item:
Title: Nanostructured magnetic materials
Authors: Mohammad Mujahid.
Keywords: DRNTU::Engineering::Materials::Magnetic materials
Issue Date: 2005
Abstract: Nanostructured alloys have considerable potential as soft magnetic materials. In these materials, a small magnetic anisotropy is desired which necessitates the choice of cubic crystalline phases of Fe, Co, Ni, etc. In the present work, Fe-50at.%Co alloys have been prepared using mechanical alloying (MA) in a planetary ball mill under a controlled environment. The influence of milling parameters on the crystallinity and crystal size in the alloys has been studied. The particle size and morphology was also investigated using SEM. In addition, a thermal treatment was employed for partial sintering of some of the MA powders. The crystal size in both the MA powders as well as compacted samples was measured using X-ray diffraction. It has been shown that the crystal size could be reduced down to less than 15 nm in these alloys. The nanocrystalline materials obtained was also evaluated for magnetic behavior.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MSE Research Reports (Staff & Graduate Students)

Files in This Item:
File Description SizeFormat 
  Restricted Access
715.08 kBAdobe PDFView/Open

Page view(s) 20

checked on Sep 22, 2020

Download(s) 20

checked on Sep 22, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.