Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/50399
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAhmad Al Faruqi Ahmad Dahri
dc.date.accessioned2012-06-01T08:16:01Z
dc.date.available2012-06-01T08:16:01Z
dc.date.copyright2012en_US
dc.date.issued2012
dc.identifier.urihttp://hdl.handle.net/10356/50399
dc.description.abstractThis project focused on the development of cutting process on a thin sheet metal which will then be used as an individual mould. Application devices such as lab-on-a-chip (LOC) make use of this mould to fabricate the device. Micro cutting is one of the fabrication techniques that has been explored and developed to produce such mould. Due to its cheap cost and flexibility in material choices, micro cutting has become the favourable method. However, the challenge was to reduce the burrs that formed in the cutting process. One approach was to make use of angled cutting tools rather than the normal mill cutter. A range of angled cutting tools of 15°, 30°, 40° and 50° were employed for the cutting process. Two types of material were used in the project to make comparisons. Different cutting phase was also done to give variations and thus analyzing the capability of each material under different parameters.en_US
dc.format.extent78 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Mechanical engineeringen_US
dc.titleThin substrate machiningen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorSathyan Subbiahen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.researchPrecision Engineering and Nanotechnology Centreen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
MB463.pdf
  Restricted Access
4.94 MBAdobe PDFView/Open

Page view(s)

236
Updated on Dec 3, 2020

Download(s) 50

6
Updated on Dec 3, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.