Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/50793
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZeng, Jie.en
dc.date.accessioned2012-11-12T01:05:24Zen
dc.date.available2012-11-12T01:05:24Zen
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationZeng, J. (2012). A fundamental study of high temperature proton exchange membranes for fuel cells. Doctoral thesis, Nanyang Technological University, Singapore.en
dc.identifier.urihttps://hdl.handle.net/10356/50793en
dc.description.abstractProton exchange membrane fuel cells (PEMFC) have been considered as an attractive energy source for both portable and automobile applications because of their high energy conversion efficiency, high power density, quiet operation and low greenhouse gas emission. The efficiency and performance of PEMFCs can be further enhanced by increasing the operating temperature to 120-250 oC due to the improved reaction kinetics and significantly reduced catalyst poisoning by CO. Water and heat management of fuel cells systems becomes easier at high temperatures. However the grand challenge is to develop proton exchange membranes with high proton conductivity and stability at elevated temperatures and low humidity. For instance, the state-of-the-art PEM is the perfluorosulfonic acid (PFSA) polymers membrane due to their good mechanical properties, excellent chemical stability and relatively high proton conductivity under highly hydrated conditions. But the conductivity of PFSA-based membranes decreases significantly at elevated temperatures due to the dehydration and degradation of the membranes under elevated temperature (over 100 oC) and low relative humidity (RH) environment. It has been well known that heteropolyacid (HPA) is a superionic conductor in its fully hydrated states. Among various HPAs, the highest stability and strongest acidity are observed for phosphotungstic acid (H3PW12O40, abbreviated as HPW or PWA). Despite their high acidity, stability and high proton conductivity, the application of HPAs in proton exchange membranes of fuel cells is limited due to the sensitivity oftheir conductivity to the relative humidity of the surrounding environment in addition to their solubility in water. The risk of the leakage of HPAs during cell operation is thus high. In this thesis, a novel inorganic progon exchange membrane using HPAs as a proton carrier and mesoporous silica as framework materials is successfully developed as proton exchange membranes for fuel cells. Mesoporous silica is used as the host material to stablize HPAs which are introduced by a vacuum impregnation method. The threshold for a good proton conductivity of the HPW-meso-silica nanocomposite is ~10 wt%. The best proton conductivity is 0.07 Scm-1 at 25oC under 100 %RH with activation energy of ~13.5 kJ mol-1, obtained on the 67-83% HPW-meso-silica nanocomposites. The high stability of the Keggin anions of HPW within the meso-silica host most likely due to the formation of (≡SiOH2+) (H2P4W12O40-) species. The proton conductivity and performance of HPW-meso-silica nanocomposites also increase with RH, but are far less sensitive to RH changes as compared to conventional PFSA polymers such as Nafion. These properties make the the HPW-meso-silica nanocomposite a promising proton conductor under high temperature and low RH environment.en
dc.format.extent236 p.en
dc.language.isoenen
dc.subjectDRNTU::Engineering::Materials::Energy materialsen
dc.titleA fundamental study of high temperature proton exchange membranes for fuel cells.en
dc.typeThesisen
dc.contributor.supervisorJiang San Pingen
dc.contributor.supervisorLi Linen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.description.degreeDOCTOR OF PHILOSOPHY (MAE)en
dc.contributor.researchTemasek Laboratoriesen
dc.identifier.doi10.32657/10356/50793en
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:MAE Theses
Files in This Item:
File Description SizeFormat 
Zeng Jie's Thesis.pdfPhD thesis on fuel cells development7.52 MBAdobe PDFThumbnail
View/Open

Page view(s) 50

576
Updated on Mar 27, 2024

Download(s) 5

508
Updated on Mar 27, 2024

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.