Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/51494
Full metadata record
DC FieldValueLanguage
dc.contributor.authorChia, Sheryl CaiYing.
dc.date.accessioned2013-04-04T02:23:24Z
dc.date.available2013-04-04T02:23:24Z
dc.date.copyright2013en_US
dc.date.issued2013
dc.identifier.urihttp://hdl.handle.net/10356/51494
dc.description.abstractHair is seen as a waste material to be discarded after a haircut. However this waste material can be reused as a biomaterial for greater applications such as wound dressing applications or skin reconstruction. Hair is made up predominantly of keratin, which is a biopolymer that is biocompatible and biodegradable. It is also found as keratinocytes on skin forming a protective layer to inhibit passage of environmental contaminants or pathogens. Hence, keratin is a promising biopolymer to be explored. Keratin is extracted as solution from a homogenous mix of hair using reducing agent sodium sulphide in an oven at 40oC, for 4 hours. As native keratin films that are cast are brittle, plasticizers are needed to improve the films’ flexibility and elasticity. In this project, glycerol is chosen as a plasticizer to be added to keratin solution and casted into films at 60oC for 21 hours. Glycerol is added to keratin solution at four different concentrations and cast into films. These films were characterized by Scanning Electron Microscopy (SEM), Fourier Transform InfraRed Spectroscopy (FTIR), Thermogravimetric analysis (TGA), Mechanical Testing using Instron 5567, Ultraviolet-Visible light (UV-Vis) Spectroscopy and Elcometer 456. These characterization tests are carried out to understand the physical and chemical properties of keratin films. From the SEM images, the morphology of the film with least glycerol seems the smoothest while the one with the most glycerol shows folding and creasing. Secondly, FTIR showed the presence of glycerol and native keratin in all the films and TGA proved that the films are thermally stable up to a high temperature of approximately 170oC. Mechanical testing showed that the film with least glycerol has the highest strength but lowest elongation and UV-Vis Spectroscopy revealed that all the films absorb in the UV region due to melanin found in hair. Lastly, Elcometer measures the thickness of the films showing a trend of decreasing thickness from the film with highest glycerol content to the one with lowest glycerol content. Upon understanding the physical and chemical properties of keratin films, no one film can be said to give the best set of properties as different applications will require different sets of properties of the films. Based on the requirements of these applications, the ideal film can be chosen and used.en_US
dc.format.extent69 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Materials::Biomaterialsen_US
dc.titleUnderstanding the physical and chemical properties of keratin filmsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.schoolSchool of Materials Science and Engineeringen_US
dc.description.degreeBachelor of Engineering (Materials Engineering)en_US
dc.contributor.supervisor2Ng Kee Woeien_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MSE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
mse12-255.pdf
  Restricted Access
2.11 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.