Please use this identifier to cite or link to this item:
|Title:||Deposition of Magneli TiOx on Ti substrate for electroxidation in water treatment||Authors:||Lee, Wei Han.||Keywords:||DRNTU::Engineering::Materials||Issue Date:||2013||Abstract:||This projectfocuses on the fabrication of Magnéli Phased Titanium sub-oxides coated Titanium electrode for electrochemical application. Two different methods of depositing Magnéli Phased Titanium sub-oxides on Titanium substrates were studied. Method I employed the idea of coating of TiO2 sol-gel on the substrate and followed by reduction in hydrogen atmosphere to obtain Magnéli Phased Titanium sub - oxides. Method II however started off with reduction of TiO2 powder to Magnéli Phased Titanium sub-oxides powder before coating them onto the substrate with sol. Three different coating methods were also adapted in coating the substrates in Method II; they were spin, dip and roll-to-roll coating. Cyclic voltammetry test was conducted to investigate the electrochemical properties of the electrodes fabricated. Method II exhibited film with better mechanical stability and coverage than Method I’s electrodes. However it showed sign of re-oxidation of Magnéli Phased Titanium sub-oxides. For Method II, the SEM imaging showed that dip and roll-to-roll coating has better coverage of the film with increased porosity than spin coating.||URI:||http://hdl.handle.net/10356/51860||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MSE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.