Please use this identifier to cite or link to this item:
|Title:||CMOS buck DC-DC converter||Authors:||Sim, Jeremy Peng Kiat.||Keywords:||DRNTU::Engineering||Issue Date:||2013||Abstract:||The aim of this project is to construct a circuit design of a buck converter. The design is based on the fundamentals of MOSFET, inductor and capacitor to model a high efficiency regulator where the input voltage is step down. Firstly, it is necessary to understand the overall working mechanics on how does a regulator works and trying out to in terms of idealistic that this design can be related to a practical scenario. Therefore, a profound research pertaining to the basic the components of the buck converter is done and compiled into a bucket list. Following which, a test set is created for each component with regards to their different components ratings, designs and work ability before conjoining these system’s pieces together and running trials within small margin differences. Finally, the individual components are brought together and the results from these finding are compared with an ideal buck regulator to determine its effectiveness.||URI:||http://hdl.handle.net/10356/52637||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.