Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/53131
Title: PCB design for DC/AC bidirectional converter in a hybrid DC/AC grid
Authors: Chung, Shi Huan.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Power electronics
Issue Date: 2013
Abstract: Current AC distribution system will no longer be the same with the penetration of clean energy and the increase demand of DC based mobile device. Many future distribution system have been proposed by researcher and one of the common proposal was Hybrid AC/DC grid. To control the Hybrid grid, the technique that commonly used was AC/DC bi-directional converter. In this report, some of the fundamental knowledge and technique required for designing an AC/DC Bi-directional Converter is explained. The controller is designed and modeled with Matlab, Simulink along with the plant system, an AC/DC hybrid grid. The system designed is simulated with Simulink to study its performance. First, the control system was tested using an open loop control were the reference value is set by the user. The testing was done in 2 of the converter mode: grid-tied inverter mode and grid-tied rectifier mode. Then, the close loop control of the system was also tested. The performance of the control system was analyzed. Some of the characteristics of the control system were discussed based on the result. Others alternative to design the control system were also discussed.
URI: http://hdl.handle.net/10356/53131
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP Final Report.pdf
  Restricted Access
861.24 kBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.