Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/53300
Title: Monitoring of tool condition
Authors: Shepherdson Nicholas Mark.
Keywords: DRNTU::Engineering
Issue Date: 2013
Abstract: Monitoring tool condition and machining processes are key factors to increase the availability of the machine tool and achieve uninterrupted machining process so as to optimize profits. Failures in the machining process and machine tool components may have negative effects on the final product part. Instabilities in machining processes also shorten the life time of the cutting edges and machine tool. Therefore, the needs for condition monitoring systems are required to utilize information from several sources to facilitate the detection of tool failing during machining process. Also, to avoid additional complexity to the machining system the use of sensors and available parameters are considered. The focus in this thesis is to investigate the indirect, vibration transmitted force transmitted, and direct method, visual observation, during face milling process correlates with the cutting tool’s life. Additional experimentations were also done to enhance the reliability of the results obtained.
URI: http://hdl.handle.net/10356/53300
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP (Cite) report 3.docx
  Restricted Access
30.32 MBMicrosoft WordView/Open

Page view(s)

308
Updated on Jul 15, 2024

Download(s) 50

19
Updated on Jul 15, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.