Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/54038
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLiang, RuiXiang.
dc.date.accessioned2013-06-12T01:16:43Z
dc.date.available2013-06-12T01:16:43Z
dc.date.copyright2013en_US
dc.date.issued2013
dc.identifier.urihttp://hdl.handle.net/10356/54038
dc.description.abstractControl of stainless steel (SS) variants’ surface wettability has attracted much attention due to their potential in the medical industry, particularly bio-implant applications. Surface modification via femtosecond laser irradiation is a promising technique due to its ability to create micro/nano-scale features with limited thermal effects. In this project, SS 316L were irradiated with ultra-short laser pulses in air at different laser processing parameters. The wettability was then characterized by static water contact angle (WCA) measurement. Surface morphology was obtained from optical images and surface roughness measurement was performed. Lastly, the irradiated samples were placed in four environments. The wettability properties and surface topography of irradiated SS surfaces under the various laser processing conditions were studied. This project showed that the SS samples initially displayed highly hydrophilic properties with WCA about 10 degrees. However, over time, the irradiated surfaces became highly hydrophobic with WCA saturating in the region of 130 degrees. The change in wettability properties was hypothesized to be due to a change in surface chemistry. The irradiated SS samples stored in different environments displayed changes in WCA measurement but did not pass from hydrophilic to hydrophobic. This re-affirmed the hypothesis that chemical changes on the irradiated surfaces are the underlying cause of changes in wettability.en_US
dc.format.extent57 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineeringen_US
dc.titleEffect of femtosecond laser irradiation on stainless steel's wettabilityen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorLam Yee Cheongen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
dc.contributor.organizationA*STAR Singapore Institute of Manufacturing Technologyen_US
dc.contributor.researchPrecision Engineering and Nanotechnology Centreen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
FYP Report.pdf
  Restricted Access
1.62 MBAdobe PDFView/Open

Page view(s) 50

445
Updated on Jul 18, 2024

Download(s)

7
Updated on Jul 18, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.