Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/54386
Title: Microwave wideband power divider on microstrip line topology
Authors: Cheng, Zihao.
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio
Issue Date: 2013
Abstract: Microwave power dividers are passive microwave devices widely used in radio technology. In this project, a wideband power divider on microstrip line is designed and simulated using the Advanced Design System (ADS) software. This power divider is designed with stepped-impedance resonator (SIR). A resistor is installed between the two output ports. During the simulation, this power divider shows 3 dB power dividing between the input and output ports, as well as good isolation between the output ports in the frequency range of 4 – 10 GHz. Overall, the result of this power divider is quite good.
URI: http://hdl.handle.net/10356/54386
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Cheng Zihao FYP report updated.pdf
  Restricted Access
FYP Report1.02 MBAdobe PDFView/Open

Page view(s) 50

152
checked on Oct 24, 2020

Download(s) 50

3
checked on Oct 24, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.