Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorCheng, Zihao.
dc.description.abstractMicrowave power dividers are passive microwave devices widely used in radio technology. In this project, a wideband power divider on microstrip line is designed and simulated using the Advanced Design System (ADS) software. This power divider is designed with stepped-impedance resonator (SIR). A resistor is installed between the two output ports. During the simulation, this power divider shows 3 dB power dividing between the input and output ports, as well as good isolation between the output ports in the frequency range of 4 – 10 GHz. Overall, the result of this power divider is quite good.en_US
dc.format.extent55 p.en_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radioen_US
dc.titleMicrowave wideband power divider on microstrip line topologyen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorZhu Leien_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Cheng Zihao FYP report updated.pdf
  Restricted Access
FYP Report1.02 MBAdobe PDFView/Open

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.