dc.contributor.authorYu, Jun
dc.date.accessioned2013-09-03T04:24:03Z
dc.date.accessioned2017-07-23T08:34:56Z
dc.date.available2013-09-03T04:24:03Z
dc.date.available2017-07-23T08:34:56Z
dc.date.copyright2013en_US
dc.date.issued2013
dc.identifier.citationYu, J. (2013). High fidelity closed-loop pulse width modulated class-D amplifiers. Doctoral thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/54836
dc.description.abstractHigh power efficiency, small size and reduced heat dissipation are highly desirable for both the low power and high power devices and the switched-mode Class-D amplifiers can readily satisfy these requirements. However, full adoption of the Class-D technology has been somewhat limited due to concerns such as signal distortion and poor power supply noise rejection. In a well-designed Class-D amplifier, the intrinsic distortions dominate the linearity performance when the input signal is large and at high frequency. In the first part of this research, a systematic analysis on the intrinsic distortion of the closed-loop Class-D amplifier is investigated based on a large-signal time-domain modeling technique. The audible output components of closed-loop Class-D amplifiers with either AD- or BD-modulated 2nd-order designs are derived. The expressions are simple, accurate, and clearly reflect the relationship among the input signal, carrier frequency, and the distortion components. In the second part of this research, a novel dual-feedforward carrier modulation topology is proposed for a 2nd-order Class-D amplifier. The proposed design can be considered a combination of two solutions/steps—a quadratic carrier generator plus two feed-forward signals. It is demonstrated that the THD of the Class-D amplifier using the proposed topology has improved by ten times over a wide range of input signal frequency and magnitude. The adopted low switching frequency also ensures a low switching loss and hence high power efficiency.en_US
dc.format.extent212 p.en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Integrated circuitsen_US
dc.titleHigh fidelity closed-loop pulse width modulated class-D amplifiersen_US
dc.typeThesis
dc.contributor.researchCentre for Integrated Circuits and Systemsen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.supervisorGoh Wang Ling (EEE)en_US
dc.contributor.supervisorTan Meng Tong
dc.description.degreeDOCTOR OF PHILOSOPHY (EEE)en_US


Files in this item

FilesSizeFormatView
PhD thesis YUJU ... - finalized submission.pdf7.747Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record