Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/60117
Title: Design and control of a cascaded boost converter
Authors: Ong, Vincent Choong Shin
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Power electronics
Issue Date: 2014
Abstract: Recent technologies have seen an increased demand in portable devices. This led to an increased demand for converters such as the DC-DC cascaded boost converter. Such converters have the ability to generate high voltage on a single battery in each device. This report presents the circuit design, implementation and control of a two-stage cascaded boost converter with a single switch using current mode control. The boost converters were used to step up a low input DC voltage to a higher output voltage. The input currents and output voltage were regulated using a current mode based controller. This project makes a comparison between the input current of two inductors in order to determine which inductor yields a better result in regulating the desired output voltage. Experimental results are also provided to show the closed-loop performance for each inductor's input current.
URI: http://hdl.handle.net/10356/60117
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
A4023-131 FYP FINAL REPORT ONG CHOONG SHIN VINCENT.pdf
  Restricted Access
Design and control of a cascaded boost converter1.72 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.