Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/60215
Title: Drilling of composite laminates
Authors: Wong, Linus Lizhi
Keywords: DRNTU::Engineering
Issue Date: 2014
Abstract: Composite materials are increasingly being used in many engineering industries due to their high specific strength, modulus and toughness. Fiber reinforced polymer composites can be made to meet the various demands of weight, stiffness and strength through proper laminate ply design. The strength and flexibility can be altered by changing the matrix, fiber type or fiber orientation. Due to limited manufacturability of composite structures, assembly by mechanical fasteners or through adhesive bonded joining is common. Drilling of such composite material is needed for mechanical joining and it is a complicated machining process. Delamination and fiber pull out are among the most serious concerns during drilling of fiber-reinforced composite material due to the need for structural joining. As such, several drilling operating factors such as speed, feed rate etc must be taken into consideration when drilling the composite material. This report investigates the general behaviour on how glass fiber reinforced polymer composite (GFRP) respond to certain drilling process parameters. Two type of drill bits (router and reamer), two different spindle speed and two feed rates were of drilling experiment were considered on two different fiber orientation (unidirectional and bidirectional cross ply) specimen. This is a continuation of previous report done by previous student, Low [1]. In addition to the thrust force, torque will also be measured and analysed. Specimen samples will also be thicker than the previous experiment to allow more data acquisition.
URI: http://hdl.handle.net/10356/60215
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYPB366_Linus_Final Report.pdf
  Restricted Access
2.53 MBAdobe PDFView/Open

Page view(s) 50

151
checked on Oct 21, 2020

Download(s) 50

18
checked on Oct 21, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.