Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/60275| Title: | A simple force and deformation analysis of deep hole gundrilling | Authors: | Chan, Huazhi | Keywords: | DRNTU::Engineering::Mathematics and analysis::Simulations DRNTU::Engineering::Aeronautical engineering::Materials of construction DRNTU::Engineering::Mechanical engineering::Kinematics and dynamics of machinery DRNTU::Engineering::Materials::Metallic materials::Alloys |
Issue Date: | 2014 | Abstract: | Workpiece deformation, short tool life and poor surface finish are challenges in the gundrilling of Inconel 718. This study was carried out to gain insights into the associated force and deformation behavior. Experimental analysis on hole deflection, tool edge forces and workpiece residual stresses were performed. Finite element simulations were also carried out to simulate the gundrilling of a workpiece section. Hole deflection was found to occur towards thinner workpiece material. In addition, shear and normal forces acting on the workpiece hole wall were found to be responsible for deformation of hole cross sectional geometry. Conclusions drawn from this study could contribute towards developing future solutions to address machinability issues. | URI: | http://hdl.handle.net/10356/60275 | Schools: | School of Mechanical and Aerospace Engineering | Organisations: | A*STAR Singapore Institute of Manufacturing Technology | Rights: | Nanyang Technological University | Fulltext Permission: | restricted | Fulltext Availability: | With Fulltext |
| Appears in Collections: | MAE Student Reports (FYP/IA/PA/PI) |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| FYP Final Report_Final_ChanHuazhi.pdf Restricted Access | FYP Final Report (Full) | 3.26 MB | Adobe PDF | View/Open |
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.