Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/60303
Title: Preparation and characterization of supported ionic liquid membrane based on PSU/BMIM BF4 for gas seperation
Authors: Gwee, Ye Zhao
Keywords: DRNTU::Engineering::Materials
Issue Date: 2014
Abstract: The purpose of this project is to prepare polysulfone membranes by using the coagulation bath method and then proceed to find out the influence of two different types of ionic liquid on the membranes. The polymer solution was prepared by mixing 20 g of polysulfone crystals with 80 ml of NMP. To obtain the polysulfone membranes, thin layers of polysulfone solution were coated onto the carbon substrate and subsequently being put into different coagulation agents to perform wet phase inversion. The coagulation agents used were ethanol and ethylene glycol. Ionic Liquid was then applied onto the polymeric membrane through the spin coating machine. Once the membranes were coated, gas permeability test was conducted on each of the membranes by using the single gas feed permeation setup whereby helium and nitrogen were used. Scanning Electron Microscope will then be used to examine the morphology of the membranes and Fourier Transform Infrared Spectroscopy was used to determine the amount of ionic liquid in each membrane. Results were then be associated to the gas separation performance for nitrogen and helium.
URI: http://hdl.handle.net/10356/60303
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_GweeYeZhao_Final.pdf
  Restricted Access
1.98 MBAdobe PDFView/Open

Page view(s) 20

149
checked on Oct 20, 2020

Download(s) 20

10
checked on Oct 20, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.