Please use this identifier to cite or link to this item:
|Title:||Wireless energy harvesting for mobile devices||Authors:||Lu, Jian||Keywords:||DRNTU::Engineering::Electrical and electronic engineering::Power electronics||Issue Date:||2014||Abstract:||Wireless energy harvesting is the technique to gather the ambient RF energy transmitted from a wireless router, radio broadcast, or TV broadcast to power up a sensor network without any interconnecting wires. In this project, a low RF power harvester design is presented to harvest the ambient energy in order to power a tag circuit. A matching circuit is designed to implement maximum power harvesting from the antenna. The operation of tag circuit is divided into two modes: active mode and standby mode. The tag circuit only requires 5uA at 2.5v in standby mode; excess energy will be stored in a buffer capacitor for accumulation until full operation mode. The system operates in the 2.4 GHz band require a minimum input RF power of -5dbm.||URI:||http://hdl.handle.net/10356/60325||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||EEE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.