Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHoong, Jie Le
dc.description.abstractThis report is a write up on what the author had learned and done during his Final Year Project period. The first part of this report will give you an idea why variable area ratio ejector was used in EMERS. After which will be analysis of experiment's data. At the end of every experiment, there will be a conclusion followed by what is the next procedure to be executed. Through the experiments, the author had gained knowledge on how varying the spindle position affects the pressure, flow rate and pressure recovery in an ejector. Author also found out that for a certain range of spindle position, pressure and flow rate were not greatly affected. Effective spindle position where significant change in pressure and flow rate was been explored. Furthermore, changing one of the parameters other than EEV2, the secondary inlet pressure of the ejector can be manipulated. Lastly, a model relating the pressure change, mass flow rate and spindle position was proposed.en_US
dc.format.extent53 p.en_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen_US
dc.titleAnalysis of ejector based multi-evaporator refrigerator systemen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorCai Wenjianen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
  Restricted Access
Experiment data readings1.28 MBAdobe PDFView/Open

Page view(s)

Updated on Nov 30, 2020

Download(s) 50

Updated on Nov 30, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.