Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/60654
Title: Investigation of viscoelastic effects on micro hot embossing process
Authors: Tan, Chin Jiat
Keywords: DRNTU::Engineering::Manufacturing
Issue Date: 2006
Abstract: In this research, a silicon tool was employed to emboss 1000 μm circular features on a poly(methyl methacrylate) (PMMA) sheet. The features were embossed at heating temperatures 105 oC to 125 oC and at different embossing forces ranging from 100 kg to 800 kg. The change in the dimensions of these features was noted at various time intervals. Features that were formed at heating temperatures of 125 oC and 115 oC showed viscoelastic effects, as the diameters recovered to a stable dimension over a period of one week. The depths of the features formed were also measured, but were not used to investigate the phenomenon of viscoelasticity due to the difficulty of measuring at the same point using a stylus profilometer. The readings of the depths were used to study the formation of shoulders around the circumference of the features embossed. It was shown that lower forces could not produce features of the required depth and could cause formation of shoulders. Too high an embossing force would produce shoulders due to stiction effects and an ideal force of 500 to 600 kg based on the height and number of shoulders formed was recommended.
URI: http://hdl.handle.net/10356/60654
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:SMA Theses

Files in This Item:
File Description SizeFormat 
Chinjiat2006.pdf
  Restricted Access
Main Report1.99 MBAdobe PDFView/Open

Page view(s)

178
Updated on May 12, 2021

Download(s)

9
Updated on May 12, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.