Please use this identifier to cite or link to this item:
|Title:||Micromachined liquid dispenser array for 3D printer||Authors:||Bong, Teck Keong.||Keywords:||DRNTU::Engineering::Manufacturing||Issue Date:||2000||Abstract:||In rapid prototyping, one of the feasible methods of achieving fast and low cost forming of 3D physical objects is by 3D printer. The main issues of the present 3D printer are the high cost and poor resolution of the printer head due to its complex fabrication and assembly processes. MicroElectroMechanical Systems (MEMS) technology was seen to be the solution to overcome those limitations. The motivation of this research is thus to design and develop high performance liquid dispenser (either single or array) based on MEMS technology for addressing the above issues. Because of the growing need for high performance liquid dispensers with high operating speed (operating frequency > 5kHz), piezoelectric driven membrane actuators for the dispensers are a favorable design.||URI:||http://hdl.handle.net/10356/6095||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Theses|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.