Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/61598
Title: Analysis of plastics in tension and bending
Authors: Chua, Yong Kai
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2014
Abstract: The purpose of this project is to study the mechanical properties of Hysol EA9396 and perform finite-element simulations using experimental results. The experiment conducted was the three-point bending test. Bending tests yield load vs. deflection data, and through further calculation, parameters such as flexural stress vs. strain were found. Using this data, the mechanical properties, namely the elastic modulus and the maximum stress of the material were found by studying the stress-strain curves. Furthermore, the tests were repeated at different temperatures and strain-rates to study their effect. The project also observed creep properties of the material and attempted to characterise properties using time-temperature superposition theorem. After experiments, the elastic moduli were used to create material models in ABAQUS (FE Software) to simulate the bending tests. Comparisons were made with test results to verify the model’s accuracy. In conclusion, this project collected valuable information and understanding about the material’s properties and successfully modelled it in ABAQUS, providing the potential for expanded scope in simulation.
URI: http://hdl.handle.net/10356/61598
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Final Report (1).pdf
  Restricted Access
2.72 MBAdobe PDFView/Open

Page view(s) 50

433
Updated on Jul 22, 2024

Download(s) 50

26
Updated on Jul 22, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.