Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/61997
Title: Fluid velocity slip and temperature jump at a solid surface
Authors: Teo, Melvin Ji Bin
Keywords: DRNTU::Engineering::Mechanical engineering::Fluid mechanics
DRNTU::Science::Physics::Heat and thermodynamics
Issue Date: 2013
Source: Teo, M. J. B. (2013). Fluid velocity slip and temperature jump at a solid surface. Doctoral thesis, Nanyang Technological University, Singapore.
Abstract: This thesis focuses on the discontinuous transport profiles across fluid-solid interfaces that are commonly encountered in micro and nano fluid systems. Despite the long history of the jump boundary conditions, most of the existing theoretical models for gas- solid and liquid-solid interfaces fail to provide satisfactory predictions of experimental findings. We first develop an adsorption model for fluid-solid interactions that is applicable to both gases and liquids. The various adsorption processes that take place simultaneously depend on factors such as the molecular energies, surface chemistry and surface fraction of vacant adsorption sites. Fluid molecules in each of these adsorption states emerge from the surface with different momenta and energies. The net velocity and temperature of the near-wall molecules, equivalent to the slip velocity and temperature jump, can be evaluated by considering the relative rates of adsorption. Our first theoretical model focuses on the subject of fluid slip over solid surfaces, where the corresponding velocities of various adsorbed fluid molecules are analysed based on the dynamics of the adsorption processes. The slip velocity expression is obtained through the overall velocity distribution of the near-wall molecules. Predictions from the new general model are compared with experimental results from the literature for gas and liquid systems. The motion by which mobile adsorbed fluid molecules traverse across a solid substrate has been suggested to occur through hops between adsorption sites. However, the slip velocity from such a mechanism has been shown to be significantly lower than that II observed experimentally. Surface diffusion of adsorbed molecules may develop in several ways other than surface hopping. We propose two surface diffusion mechanisms by which molecular slip may take place. These alternative mechanisms are capable of producing elevated molecular slip velocities that are much closer to measured quantities. Using the proposed adsorption framework of fluid-solid interactions, we derive an interfacial temperature jump expression for gas-solid and liquid-solid interfaces. In this model, the temperature jump is evaluated by considering the energies of fluid molecules that correspond to their adsorption states. Experimental data from the literature is used as corroboration for the new model, which addresses the inadequacies of current temperature jump theory in the prediction of observed temperature jump behaviour.
URI: https://hdl.handle.net/10356/61997
DOI: 10.32657/10356/61997
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MAE Theses

Files in This Item:
File Description SizeFormat 
Fluid Velocity Slip and Temperature Jump at a Solid Surface.pdf4.41 MBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.