Please use this identifier to cite or link to this item:
Title: Design of a broadband Quasi-Yagi dipole
Authors: Yeo, Chun Beng
Keywords: DRNTU::Engineering::Electrical and electronic engineering::Antennas, wave guides, microwaves, radar, radio
Issue Date: 2014
Abstract: This report suggest the design, fabrication and testing of a Planar Quasi-Yagi dipole antenna using bow-tie element feed from a Microstrip Parallel Stripline Transition. The antenna is design to operate in the frequency band from 800MHz to 2100MHz with ƒc define at 1450MHz. The bandwidth of the antenna was specified to be about 90%. By incorporate the design of a Planar Quasi-Yagi dipole together with the Bow-tie element, the antenna have the advantages of the directional beam of a Yagi and the wide-band of a Bow-tie. The analysis of the antenna was performed by using Ansoft High Frequency Structure Simulator (HFSS). After which, the physical antenna is fabricated and tested using Anritsu S332D Site Master. Results between the HFSS simulation and prototype antenna were compared and validated. The radiation pattern of the prototype antenna will also validated using a simple Anechoic Chamber setup.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Final Report_P5004-131 Design of a Broadband Quasi-Yagi Dipole.pdf
  Restricted Access
2.92 MBAdobe PDFView/Open

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.