Please use this identifier to cite or link to this item:
Title: Stress analysis of short flat bars with projections using boundary element method (BEM)
Authors: Tan, Sing Maan
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2015
Abstract: Structural components made from high strength material are usually undergoing high stresses and are likely to exceed its yield strength and ultimately fractured. To prevent unforeseen structural failure from occurring, localization of stresses were quantified and made use by designing engineer. In this report, stress analysis was carried out on short flat bar with projections by using boundary element method in the form of stress concentration factor. Axial or shear loading was applied to the short flat bar with projections under remote or local restraint. Stress distribution profile was presented and the effect of stress raisers have been studied. Effect of geometric parameters of the bar on stress concentration factor were obtained and analyzed. A comparison between published finite element analyses data from literature and results of this analyses was done in the later section of this report. It was found that stress peaked at the fillet region. The results obtained suggested an increase of normalized fillet radius with respect to shank depth, R/d reduced the effect of stress concentration.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_Final Report_With side bar.pdf
  Restricted Access
1.36 MBAdobe PDFView/Open

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.