Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/63664
Title: Injection molding of thermoplastics microfluidic device
Authors: Muhammad Ridwan Mohd Idris
Keywords: DRNTU::Engineering::Mechanical engineering
Issue Date: 2015
Abstract: Microfluidic devices have been around since the 1980s. They are used for researches in many different fields, ranging from engineering to biotechnology. As such, the demand for microfluidic devices is ever-growing. Many ways are then being explored to facilitate the fabrication of these devices in the shortest time possible. As a result, injection molding becomes the widely-chosen method to make these thermoplastic microfluidic devices due to its ability to rapidly produce parts in large quantities. One of the major concerns of microfluidic devices is the presence of molded-in residual stress. It has an effect on the microchannels deformation during the thermal bonding process. Therefore, the author will explore how the molding parameters affect the molded-in residual stress with the study focusing on holding temperature and cooling temperature of the injection molding process.
URI: http://hdl.handle.net/10356/63664
Schools: School of Mechanical and Aerospace Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP Draft.pdf
  Restricted Access
FYP Final Report of Injection Molding of Thermoplastics Microfluidic Device2.25 MBAdobe PDFView/Open

Page view(s)

306
Updated on Jun 21, 2024

Download(s)

14
Updated on Jun 21, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.