Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/64219
Title: Chamber/heater communication and control via serial port and Matlab
Authors: Ye, Chongren
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2015
Abstract: Nowadays, the environment for most experiments should be controlled and adjusted strictly. A Chamber/heater will provide the different environment, and test condition for drive performance. In order to control and adjust the Chamber/heater in accuracy, it’s useful to control the Chamber/heater by programming system to achieve this. While MATLAB has great potential to be a good communication to online control chamber and change the test environment. This project is aim to design a software mainly through MATLAB to connect the communication between chamber and MATLAB based on the knowledge of serial port communication and data transfer formats. In the designed software, some MATLAB script functions should be built to give command to the chamber and receive the information back at the same time. Meanwhile, a GUI should be fabricated to build a control panel on the Chamber and achieve remote all the system.
URI: http://hdl.handle.net/10356/64219
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_Ye_Chongren.docx.pdf
  Restricted Access
Main article1.68 MBAdobe PDFView/Open
14-15 FYP.pdf
  Restricted Access
6.28 MBAdobe PDFView/Open
receipt_14-15 FYP.pdf
  Restricted Access
298.36 kBAdobe PDFView/Open
receipt_FYP.pdf
  Restricted Access
298.32 kBAdobe PDFView/Open

Page view(s)

207
Updated on Aug 17, 2022

Download(s) 50

30
Updated on Aug 17, 2022

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.