Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/64333
Title: Variable gain amplifier deign for RFIC
Authors: Yang, Yajing
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2015
Abstract: A CMOS power amplifier is an important building block in the wireless systems design. The automatic gain control in CMOS power amplifier is mostly realized with a variable gain amplifier. In RF design, it is required for the variable gain amplifier to have high linearity, wide bandwidth and large gain range, and the relation between gain of the VGA and the control signal must be linear-in-decibel. In this project, a variable gain amplifier was designed with a self-biased differential amplifier and a linear-in-decibel variable amplifier. Design techniques including multistack transistors, body biasing resistor, impedance feedback loop and dynamic current bias were applied to improve design performance. Based on the simulation result, the variable gain amplifier proposed a 3dB bandwidth of 0.021~2.43GHz, and gain range is 10.1~-21.2dB. And the P1dB point and noise figure at 1.95GHz are -1.77dB and 17~48dB respectively.
URI: http://hdl.handle.net/10356/64333
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
EEE Yang Yajing FYP Report.pdf
  Restricted Access
2.26 MBAdobe PDFView/Open

Page view(s)

166
Updated on Nov 26, 2020

Download(s) 50

15
Updated on Nov 26, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.