Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/64720
Title: Improving accuracy of state estimator solutions
Authors: Liu, Yao
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2015
Abstract: In power systems, state estimation is one of the core functions of energy management system (EMS). And its function is based on a variety of measurement information to estimate the current state of the power system. To protect the safety of modern power system, it depends on the energy management system (EMS), and the plenty of functions in EMS can be divided into two major sections: analysis of real-time changes for online applications and analysis of typical trend for off-line applications in power systems. State estimation can be regarded as the basis for most of the advanced online application software. If the results of state estimation are not accurate, and the subsequent analysis and calculation will not get accurate results as well. Hence, we can understand the importance of a correct state estimator solution. In this project, the main objective is to improve the accuracy of state estimator solutions and eliminate the unexpected errors in the state estimation. Corresponding troubleshooting methods have been conducted, such as collating the MTALAB codes with state estimation algorithm, measuring on the inductance and line impedance, checking the admittance matrix, modifying the parameters of the system and so on. In addition, the relationship between the state estimation algorithm and MATLAB codes was explained and verified. By figuring out how the parameters affect the state estimated results, state estimation has been well understood. Another objective is to solve the compatibility problems. By following the principle of trace-back, the problems have been fixed by the debugging LabVIEW program. A Simple Error Handler was added to find out the source of the problems. In the process of finding the errors, Energy Management System (EMS) flow was investigated, which is in the order of State Estimation, Bad Data Detection and Identification, Automatic Generation Control and Optimal Power Flow. Apart from the two objectives, Microgrid Topology was verified and a correspondence table was built regarding to the orientation of bus numbering system. The recommendation for future work would also be discussed at the end.
URI: http://hdl.handle.net/10356/64720
Schools: School of Electrical and Electronic Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Final Report_Liu Yao .pdf
  Restricted Access
5.24 MBAdobe PDFView/Open

Page view(s)

395
Updated on Jun 22, 2024

Download(s) 50

28
Updated on Jun 22, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.