Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/65314
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLaw, Geraldine Xue Ning
dc.date.accessioned2015-07-16T04:44:27Z
dc.date.available2015-07-16T04:44:27Z
dc.date.copyright2015en_US
dc.date.issued2015
dc.identifier.urihttp://hdl.handle.net/10356/65314
dc.description.abstractThis final year project was set out to collect the findings of certain parameters that would affect the size of magnetite nanoparticles being produced. The parameters being investigated to affect the size of nanoparticles were the flow-rate of reactants injected into the microfluidic channels as well as the width of channels used. The procedures in fabrication of magnetite nanoparticles (Fe3O4) with citric acid as surface coating will be discussed in detail. The method of fabrication used in this project was the microfluidic channel device, with the co-precipitation mechanism of Fe2+ and Fe3+ ions. An improvement to the method of synthesis has been made, which is to use a one-step synthesis for the injection of citric acid into the microfluidic device.en_US
dc.format.extent52 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen_US
dc.titleDevelopment of microfluidics device for nanoparticles fabricationen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorYong Ken-Tyeen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
fypfinal.pdf
  Restricted Access
93.37 MBAdobe PDFView/Open

Page view(s) 50

369
Updated on Jan 25, 2021

Download(s) 50

36
Updated on Jan 25, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.