Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/65796
Title: Create USB radar and perform measurements
Authors: Sun, Yi
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2015
Abstract: Radar is an Object-detection system that uses radio waves to determine the range, angle, or velocity of objects. Since the year 1940, radar systems have been used to detect and identify targets. Doppler mode is effective to detect the position and velocity of a moving target. Classification, recognition, and identification of targets and motion kinematics based on micro-Doppler signatures has become an emerging research subject. In this project, RFbeam ST200 Evaluation Kit was used to acquire and process Radar signals of RFbeam Transceivers. The ST200 supports Doppler, FMCW, FSK and Monopulse mode, it provides evaluation of shortrange radar signals, as well as signal analysis and logging. As the evaluation kit offers computer interface, once connected to PC it can serve as USB radar. The detected signal can be recorded in TDMS mode, in order to better process and analysis the signal, it’s required to convert the TDMS format to Matlab format. Hence the real-time analysis through Matlab program is yet to be implemented. From the version of Matlab 2014a, there is a new feature added in which is the Data Acquisition Toolbox, it is possible for the Matlab to control the RFbeam St200, and hence record signal and perform analysis at the same time.
URI: http://hdl.handle.net/10356/65796
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
SUN_YI_FYP_FINAL_Report.pdf
  Restricted Access
1.86 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.