dc.contributor.authorTanzania, Robin
dc.date.accessioned2016-03-03T04:08:43Z
dc.date.accessioned2017-07-23T08:36:22Z
dc.date.available2016-03-03T04:08:43Z
dc.date.available2017-07-23T08:36:22Z
dc.date.issued2016
dc.identifier.citationTanzania, R. (2016). Design of wireless power transfer coils to minimise capacitor stress and AC resistance. Master’s thesis, Nanyang Technological University, Singapore.
dc.identifier.urihttp://hdl.handle.net/10356/66032
dc.description.abstractA Wireless Power Transfer system for charging electric vehicles must have high efficiency to compete with wired charging. Although efficiency can be increased using a number of ways, in the lumped circuit model the only loss comes from parasitic resistances of the system. In a WPT system, AC resistance of power transfer coils is the most dominant source of power loss and it increases considerably with frequency. Therefore AC resistance of coils is the most important factor of efficiency. Additionally, most WPT systems work using resonant coupling. Due to resonance, reactive voltage in a series resonant tank and current in a parallel resonant tank can be several times the input and output voltages and currents, depending on the topology used. This work presents a design procedure that attempts to address those two problems in the design of a WPT system. First is to minimise capacitor stress by quantifying the voltage and current stresses in relation to the operating conditions of the WPT system and second to minimise the absolute resistance of a WPT coil. This design procedure results in the lightest coil designs that can be chosen from commercially available Litz wires. Experimental validation has achieved 10 kW wireless power transfer using 0.6 kg coils with 18 cm air-gap, 98.6 % coil-to-coil efficiency and 94.8 % DC-to-DC efficiency, with the measured values agreeing well with the design calculations. Sensitivity analysis has also been done to explore the effects of coupling factor in the system.en_US
dc.format.extent96 p.en_US
dc.language.isoenen_US
dc.subjectDRNTU::Engineering::Electrical and electronic engineering::Power electronicsen_US
dc.titleDesign of wireless power transfer coils to minimise capacitor stress and AC resistanceen_US
dc.typeThesis
dc.contributor.researchEnergy Research Institute @NTU
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.contributor.supervisorSiek Liter (EEE)en_US
dc.contributor.supervisorChoo Fook Hoong
dc.contributor.supervisorFoo Chek Fook
dc.contributor.supervisorTan Yen Kheng
dc.description.degreeMASTER OF ENGINEERING (EEE)en_US


Files in this item

FilesSizeFormatView
Robin Tanzania Amended Thesis 2016-03-02.pdf12.40Mbapplication/pdfView/Open

This item appears in the following Collection(s)

Show simple item record