Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/67308
Title: Low cost fabrication of CZTS thin film solar cell
Authors: Chan, Weng Leong
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: Due to depletion of crude oil, a lot of research have been done on renewable energy such as hydro, solar and wind power. Solar Energy produced the highest renewable energy conversion efficiency in Singapore. Second generation solar cell has the advantages of achieving low thickness and high flexibility which ignite the interest on this research project. The objective of this project is to study the effects of interface on the Cu2ZnSnS4 (CZTS) Thin Film solar cell device performance. Acetate-based and chloride-based CZTS were used in this research. Research shown that CZTS/MoS2 are able to form good ohmic contact which benefits carrier transportation. Prediction is made that MoS2 interface will achieve the best device performance. Results showed that Acetate-based CZTS achieved conversion efficiency of 4.17% with a fill factor of 48.85. However, chloride-based CZTS showed that vacuum interface achieved the highest efficiency of 0.5%. As compare to the literature review, there was a great differences on efficiency due to incomplete reaction of CZTS, unfavourable scratches formation on the interface, weak contact formed.
URI: http://hdl.handle.net/10356/67308
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MSE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP Report_ Chan Weng Leong-Final-LHW_edited.pdf
  Restricted Access
2.61 MBAdobe PDFView/Open

Page view(s)

221
Updated on Jun 19, 2021

Download(s) 50

45
Updated on Jun 19, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.