Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/67516
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAditya Sunil Nalkur-
dc.date.accessioned2016-05-17T07:21:05Z-
dc.date.available2016-05-17T07:21:05Z-
dc.date.issued2016-
dc.identifier.urihttp://hdl.handle.net/10356/67516-
dc.description.abstractThis paper presents a study of using seawater as a material for a quarter wave monopole antenna for use in the High frequency range of 3-30MHz. Traditional monopoles are usually made of metals such as copper and aluminium and are excited by an electric coil. However, in this paper, the current probe is designed to be able to excite the seawater antenna stream as it passes through the monopole to transform it into an antenna for communication purposes. The current probe was designed using the CSTMWS software and tested using a PEC antenna. The number of turns of coil were varied and the results were tabulated. The return loss results showed that using 200 turns of winding wire gave optimal results. The antenna material was then changed to seawater and simulations were done by varying seawater antenna radius and the conductivity of the seawater. Varying the thickness of the seawater antenna showed that both the return loss and gain of the antenna improved as the radius increases. Also, increasing the conductivity increased the gain of the antenna but the return loss performance become poorer. An experiment was also carried out for four test frequencies and the results were compared against the simulations performed for the seawater monopole antenna. The gain for the seawater antenna obtained from the experiment was very similar to the simulations. Recommendations have also been made to improve the performance of this seawater monopole antenna. Effectively, this study did indeed show that seawater is a possible material for use as an antenna and with more research, could replace metallic antennae in the future.en_US
dc.format.extent81 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineeringen_US
dc.titleHigh frequency antenna designen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorLee Yee Huien_US
dc.contributor.supervisorShen Zhongxiangen_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
Aditya Sunil Nalkur FYP Report.pdf
  Restricted Access
3.12 MBAdobe PDFView/Open

Page view(s)

114
Updated on Dec 3, 2020

Download(s)

9
Updated on Dec 3, 2020

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.