Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/67644
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLing, Irvin Soon Rong-
dc.date.accessioned2016-05-18T09:23:39Z-
dc.date.available2016-05-18T09:23:39Z-
dc.date.issued2016-
dc.identifier.urihttp://hdl.handle.net/10356/67644-
dc.description.abstractThe increasing popularity of smart grid technology which involves producing electricity at local buildings such as photovoltaic cells and wind energy have been producing DC power. In addition, the goal of the European Union (EU) has stated their goal of having a “net-zero-energy” by 2020 [1]. The goal is to have the energy sources of buildings should be from mostly renewable sources and sources produced on-site. While many studies have been conducted concerning integrating DC components into the DC grid system, there has been little done to study the efficiency of extra low voltage devices being powered up in the grid. Therefore a study of setting up a 5V DC grid powering up extra low voltage devices through USB ports was carried out. AC grids provide power to offices, however many loads in commercial buildings have loads of DC nature. The current practice to power these loads require conversion from AC-DC and DC to AC using rectifiers and inverters respectively [2]. This practice would lead to high conversion losses, therefore consolidating the supply for DC loads should be implemented in a DC grid to achieve better efficiency. Objective of the study was to find out the optimal conditions to charge a 3000mah lithium ion power bank by varying parameters. These include: distance from power supply, time taken to charge as well as power efficiency considerations. The study will be done in comparison with the usual charging process by a USB charger.en_US
dc.format.extent60 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University-
dc.subjectDRNTU::Engineeringen_US
dc.titleFeasibility of implementing USB port outlets in commercial buildingsen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorTseng King Jeten_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
final report_final (1).pdf
  Restricted Access
Final Report1.59 MBAdobe PDFView/Open

Page view(s)

113
Updated on Jul 25, 2021

Download(s)

4
Updated on Jul 25, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.