Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/67654
Title: Design and build an inverting switching regulator
Authors: Tan, Lee Hao
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: In this project report, the objective is to design and build a switching inverting regulator using MC 34063A microchip. As the non-stop advancement in technology, there are more specification demands to meet to power up these electrical devices. Therefore, the MC 34063A microchip is being widely used in the world today because of its versatility. Every different device requires a specific different supply in order to operate. Depending on the different application, with an external circuit connection, the MC 34063A microchip can become a boost (step-up), buck (step-down) or buck-boost (inverting) regulator. The parameters in this project are to output a -12V DC which is able to supply to a 200mA load from a 5V ± 5% input voltage from a Universal Serial Bus (USB). Results of the experiments are recorded, analyzed and compared with theoretical predictions. Loads of different values are also tested to examine the effect of the loads on the switching inverting regulator. With the help from this report and other similar reports, all of the three different regulators can be design and build onto a single board which can be change by just flipping a switch. In addition, there is a need to enhance the efficiency of the switching inverting regulator.
URI: http://hdl.handle.net/10356/67654
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
NTU FYP Report.pdf
  Restricted Access
3.01 MBAdobe PDFView/Open

Page view(s)

124
Updated on Jun 24, 2021

Download(s) 50

23
Updated on Jun 24, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.