Please use this identifier to cite or link to this item:
Title: Development of an integrated board of power and interface for UAV
Authors: Zheng, Chao
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: Unmanned Aerial Vehicle(UAV), A very complicated aircraft that contain vary different part, We don't just make sure each part can work separately, but also when everything put together, it must function properly too. Normally we are using battery pad to supply power to the UAV, but the output power of the battery pad is not constant due to long time usage. In this project, our main job is to make sure we can give the constant desired voltage output to supply power to the other parts of UAV such as Motor, sensor etc. Build the circuit to expand the output port of USB because there is many signals transmit during flying, so we must make sure that there is sufficient input or output port for the UAV.This report will show the principle of building these circuits, why we choose the these components in our design and the logic when we building the circuits. The software Altium-designer (AD) will also be introduce in this report, to show how to draw circuits by using this software and the final product of the PCB board.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
fyp report `.pdf
  Restricted Access
final report1.81 MBAdobe PDFView/Open

Page view(s)

Updated on Jun 12, 2021


Updated on Jun 12, 2021

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.