Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/67977
Title: Design and development of DSP based modular DC microgrid-II
Authors: Liu, Qi
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: In nowadays, the DC micro grids become more and more popular than it was before, especially working with power electronic converter. Micro grid are becoming a promising technology for integrating distributed renewable energy systems and power storage systems with its high vitality efficiency and high power quality. This paper mainly talks about DSP based modular DC micro grids. The whole project contains three different operation modes, battery charging and discharging mode, Photovoltaic mode one and two. The battery can be charged by PV panels and discharged to supply the load located on the high-voltage side of the Bi-directional in dc to dc conversion. While during the mode of PV, it runs at concentrated power point tracking mode in order to capture the significant power point. The project can be divided into two parts, hardware design of the DSP based modulation and software programming algorithm. The hardware parts are combined with DSP controller board, main board of DC/DC converter, communication emulator and other supported devices. In window base station code composer studio, the program can be run and modulated in respected mode.
URI: http://hdl.handle.net/10356/67977
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_report.pdf
  Restricted Access
4.92 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.