Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/67996
Title: Design of 1.8V supply subthreshold voltage reference
Authors: Wang, Xiaoying
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: Voltage reference circuit plays a critical role in most of the electronic devices with high precision requirements. The relatively constant output voltage is irrespective of supply variations, temperature change, passage of time and so on. Conventionally, an op-amp based voltage reference requires both MOSFET and BJT to realize the compensation in temperature dependent factors. Nonetheless, the process used in this design is Austria Micro System 0.18μm CMOS with 1.8V supply. Hence the headroom of device operation is limited due to low supply voltage. Instead of making use of the BJT currents’ temperature characteristics, MOSFET’s subthreshold region of operation was employed to generate temperature dependent currents. In this project, a 1.8V supply voltage reference circuit was constructed. Simulations and analyses were performed in Cadence Virtuoso Analog Design Environment. The outcome of this voltage reference achieves 1V output voltage with temperature coefficient of 58.9ppm/°C and power supply rejection ratio of 42.37dB.
URI: http://hdl.handle.net/10356/67996
Schools: School of Electrical and Electronic Engineering 
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_Report_WANG_XIAOYING.docx.pdf
  Restricted Access
Final Report3.06 MBAdobe PDFView/Open

Page view(s)

326
Updated on Jun 23, 2024

Download(s) 50

38
Updated on Jun 23, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.