Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/68313
Title: Preferential buckling
Authors: How, Wai Lum
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: This project tackles the challenge of designing an elastic structure such that a desired deflection shape is achieved when the structure is buckled through axial loading. The buckling phenomenon, though often regarded as a structural failure mode, has a large number of applications in engineering and the natural world. The project is a follow up on the previous project in seeking to find answers from fundamentals. As such, it focuses on understanding and inverting the existing methods of buckling analysis, mainly on nonlinear analysis. The method identified was derived from Euler Bernoulli beam theory. The method was then further developed to incorporate boundary conditions and create solution codes using MATLAB. Through MATLAB codes, the correctness of the theory was ascertained, followed by further tests to determine the possible limitations. It was found that the nonlinear theory was correct; on the condition that the applied load was small. The theory fell short with the increase in applied load. Some reasons were discussed, including the possibility of additional constraint being required. These reasons provide useful starting points for further investigations into the topic.
URI: http://hdl.handle.net/10356/68313
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP report(WaiLum)Final2.pdf
  Restricted Access
FYP report1.43 MBAdobe PDFView/Open

Page view(s)

102
Updated on May 6, 2021

Download(s)

13
Updated on May 6, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.