Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/68392
Title: 3D printed antenna for 5G mobile networks
Authors: Ma, Jiaheng
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: The complexity of antenna structures may reach the limitation of traditional fabricating methods, and this problem can be solved by using 3D printing technology. The goal of this project is to verify the feasibility of printing antennas, through studying the process of antenna design of microstrip patch antennas. A microstrip patch antenna operating in 6GHz was designed in a software. The design was turned into physical units with 3D printing technology. Comparisons between theoretical electrical performance and simulation results, as well as tested results after fabrication, were conducted. With acceptable error tolerances, the practicability of printing antennas was preliminarily verified. Throughout the whole project, knowledge of antenna theorems, antenna design was studied. Practical skills of fabrication and software simulation were also gained.
URI: http://hdl.handle.net/10356/68392
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP_Report_Ma_Jiaheng_A2333-151.pdf
  Restricted Access
3.14 MBAdobe PDFView/Open

Page view(s)

186
Updated on May 12, 2021

Download(s) 50

25
Updated on May 12, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.