Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/68549
Title: Elderly support system (device hardware development)
Authors: Tan, Li Ting
Keywords: DRNTU::Engineering
Issue Date: 2016
Abstract: This project aims to develop an elderly support system to aid caregivers and family members in monitoring the well-being of an elderly at home, in elderly care centres or in hospitals. This support system consists of a wearable elderly tag which integrates several sensor modules together with a microcontroller integrated, low power system on chip (SoC). This report describes the process of developing this elderly tag, including all the considerations taken during the selection of the components, the routing of the printed circuit board (PCB) and the programming of the tag’s functions and communication modes. Achieving an acceptable tag size during the circuit and PCB designing process, variable packet length communication was also used to effectively communicate between the elderly tag and a receiver, where the received information can be sent and viewed on MATLAB for further analysis or display to the user. The casing of the elderly tag was also printed using 3D printing and it is capable of housing the developed elderly tag PCB to be strapped around the wrist of the elderly.
URI: http://hdl.handle.net/10356/68549
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
Tan Li Ting FYP Final Report.pdf
  Restricted Access
3.4 MBAdobe PDFView/Open

Page view(s)

154
Updated on Jun 23, 2021

Download(s) 50

39
Updated on Jun 23, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.