Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/68737
Title: Electrical performance assessment of a pontoon roller Wave Energy Converter (WEC) at Tanah Merah Ferry Terminal (TMFT)
Authors: Xiong, Manni
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2016
Abstract: The purpose of this project is to develop the wave energy converter model in Matlab/Simulink environment and put real measured data in to get power outcome, and compare the measured power and the simulation power. The power system is developed from wave turbine, which is a roller can be motivated by the wave through the pontoon, with gear box, to PMG (acronym o f permanent magnet generator) generator, to ACTDC rectifier, to DGfDC buck converter with MPPT (acronym of maximum power point track) microcontroller, to battery bank, and to DCTDC boost converter then DC/AC inverter with consumer load. Among these components, the WEC (wave energy converter) model and the outcome from the simulation and real measurement is the focus described in this dissertation. At first, the initial condition o f devices that developed at TMFT was introduced, and the whole structure was introduced, then the models developed in the Simulink software was introduced, there are three kinds of generator models and the control system o f the generator. At the end, the comparison between the measured data and simulation data was introduced.
URI: http://hdl.handle.net/10356/68737
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Theses

Files in This Item:
File Description SizeFormat 
Xiong_Manni_2015.pdf
  Restricted Access
Main report14.55 MBAdobe PDFView/Open

Page view(s)

135
Updated on Jun 12, 2021

Download(s)

10
Updated on Jun 12, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.