Please use this identifier to cite or link to this item:
|Title:||Hydrostatic extrusion-drawing of fine wire||Authors:||Cheung, John S. T.||Keywords:||DRNTU::Engineering::Manufacturing::Product engineering||Issue Date:||1988||Abstract:||Hydrostatic extrusion is a possible alternative method of producing fine wires. This report describes mainly the experimental machine that has been design and built at NTI to test this process. The machine is designed for semi-continuous extrusion at a very high pressure of 960 MPa (9500 bars). The 25 mm diameter pressure chamber has a shrink-fit duplex construction. Pressure is generated throught two stages of intensification from normal shop air.||URI:||http://hdl.handle.net/10356/6911||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Research Reports (Staff & Graduate Students)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.