Please use this identifier to cite or link to this item:
|Title:||Design of a piston-cylinder mechanism for vortex ring formation||Authors:||Ng, Wei Kiat||Keywords:||DRNTU::Engineering||Issue Date:||2016||Abstract:||This report gives detail of the design improvement done on the piston- cylinder mechanism used for generating vortex ring and observation done from the set-up to for impingement of vortex ring onto a concave surface. Based on the design review the existing design of the piston and cylinder mechanism use by Kuan, (2013) , there is a need to improve the design. With the re-designed of the vortex ring piston ring cylinder which consist of using a close coupled design and proper design of O-ring usage, it was able to produce consistent result without any leakages during operation. The observation was used to compare mainly with 2 journals done by Couch & Krueger (2011)  and New et al. (2016)  with a comparison flat surface. In the experiment, the dynamics of the circular vortex ring with Reynolds number Re=2000 and Re=4000 was observed 2 dimensionally using laser induce fluorescence visualization. From the result, it is very similar as described and for concave surface, a vortex dipole and small vortex ring-like structure are produced when the vortex ring impinged on to the concave surface with a diameter of 120mm.||URI:||http://hdl.handle.net/10356/69268||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Student Reports (FYP/IA/PA/PI)|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.