Please use this identifier to cite or link to this item:
|Title:||Four points bending of composite pipes||Authors:||Leong, Peng Chuen||Keywords:||DRNTU::Engineering::Mechanical engineering||Issue Date:||2017||Source:||Leong, P. C. (2017). Four points bending of composite pipes. Master's thesis, Nanyang Technological University, Singapore.||Abstract:||The objective of this study is to identify the how pure bending will affect different materials in the view of assessing the spoolability of these materials. Experiments using four point bending were conducted on multilayered composite tubular pipes. The multilayered pipes have an external hard layer with a softer inner layer made of high density polyethylene (HDPE) thermoplastic. The external hard layer is made from either polyvinyl chloride (PVC) and glass/epoxy. The interface conditions between the hard and soft layers are either bonded or unbonded. From the experimental results, the deflection and loading versus deflections and loading versus strains graphs show glass/epoxy has a much higher stiffness and larger deflections as compared to PVC. The experimental results also indicated that bonded and unbonded soft layer of HDPE does not affect the stiffness significantly. The minimum spool radius for PVC is 2.5 m while adding a soft layer of HDPE reduces it to 2.08 m for both bonded or unbonded cases. The corresponding increase in moment is 13.65%. For glass/epoxy fibre, the spool raidus is about 2.08 m with or without the HDPE layer. There was also a large increase in the loading moment between using glass/epoxy and PVC pipes, a massive 627%. It is conclusive that spoolability performance of glass/epoxy is much lesser than that of PVC. While adding a soft inner layer for PVC leads to some increase in spoolability, it does not have any significant impact for the harder pipes such as glass/epoxy. The study also consider the differences between measurements taken on loading movements from the bottom rollers or the top rollers. The results corroborated that the displacement from bottom rollers are more coherent and accurate to the actual displacements. Hence, measurements from loading movements of the bottom rollers should be used in 4 point bending experiments.||URI:||http://hdl.handle.net/10356/69900||DOI:||10.32657/10356/69900||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Theses|
Updated on Jun 21, 2021
Updated on Jun 21, 2021
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.