Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/70717
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGuo, Guoqiang
dc.date.accessioned2017-05-09T07:41:00Z
dc.date.available2017-05-09T07:41:00Z
dc.date.issued2017
dc.identifier.urihttp://hdl.handle.net/10356/70717
dc.description.abstractTransmission lines are the main channels that interlink consumers to the power grid. Documented in Singapore Energy Statistics 2016 by EMA, the demand for electricity consumption has been increasing over the years. In a span of one year, from 2014 to 2015, energy consumption raised by 2TWh. With the increase in energy demand, there is a need for more transmission lines to increase the rate of electrical energy transportation. On the contrary, transmission lines are constantly exposed to faults, be it man-made or natural. Thus, with more lines, more faults will materialize. A fault localization project is adopted to efficiently locate the fault point with equitable accuracy, which might serve its purpose to minimize downtime for industry application. The suggested technique was tabularized using transmission line theory, by treating voltages and currents as traveling waves. A fault location expression was formulated from transmission line impedance equation. Experimentations were carried out using RF (for frequency between 300kHz to 15MHz) equipment like VNA, to verify the expression. Two measurement setups were implemented with VNA, to measure six cases of DUT with different fault locations. The main fault that was examined is an open circuit fault. All measurements were corroborated via counterchecking of passive components and a simulation tool. Error of percentage serves as an indication on how well the technique is able to identify each fault location. For one-port setup, the error is less than 1% for 5m and 10m power cable, and for two-port setup, error falls below 7% for both the power cable. Even though, the two-port setup error was more than that of one-port’s, the results between 300kHz and 15MHz are more unswerving, which is less distorted, making it more reliable. Thence, with a technique that can locate fault distance with little errors, it provides personnel sufficient approximation on which section of the lines needs attention and restoration.en_US
dc.format.extent75 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen_US
dc.titleFault localization of a long power cableen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorSee Kye Yaken_US
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen_US
dc.description.degreeBachelor of Engineeringen_US
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
FYP Final Report_U1422046E_Guo GuoQiang.pdf
  Restricted Access
16.25 MBAdobe PDFView/Open

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.