Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/70770
Title: The design of an operational transconductance amplifier (OTA)
Authors: Yap, Deep
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2017
Abstract: Operational amplifiers are commonly used in analog circuit designing, especially operational transconductance amplifier (OTA)which is used to convert input voltage signal into an output current. However, OTA could only drive capacitive load, therefore an extra output stage is needed. The OTA is designed using the nested- current mirror technique, which is able to deliver a DC gain of 70dB, phase margin more than 60 degrees and with slew rate of 8mV/μs for a capacitive load of 0.5nF. The output stage is designed in a class AB configuration, which would able to sink and source 1mA current to a 1kΩ resistive load while maintaining output swing with one overdrive voltage less than the supply voltage. The CMOS technology used is 0.18μm.
URI: http://hdl.handle.net/10356/70770
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
fyp final report (Yap Deep).pdf
  Restricted Access
1.92 MBAdobe PDFView/Open

Page view(s)

131
Updated on May 17, 2021

Download(s) 50

28
Updated on May 17, 2021

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.