Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/70940
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAbdul Hafiz Abdul Rahman
dc.date.accessioned2017-05-12T04:42:18Z
dc.date.available2017-05-12T04:42:18Z
dc.date.issued2017
dc.identifier.urihttp://hdl.handle.net/10356/70940
dc.description.abstractSelective laser melting (SLM) is one of the additive manufacturing (AM) processes that produces complicated parts by fusing metallic powders with a high-energy beam from computer-aided design (CAD) data. With the involvement of numerous processing parameters, SLM may influence the properties of the final part. Application of inappropriate processing conditions may result in multiple defects like balling, cracks and irregularities in the surface morphology. Hence, establishing the relationship between the processing parameters by SLM and surface morphology is important to produce a fully density parts. In this study, equal weight percentages of titanium and tantalum powder (Ti-50%wt Ta) was fabricated using SLM. The influence of processing parameters on the microstructure and other properties like relative density, microhardness and surface roughness were investigated. The results show that a fully dense titanium-tantalum part able to obtain a high microhardness value in both xy-plane and yz-plane with a minimum surface roughness value in xy-plane. The relative density achieved by Archimedes method is close to 99.9 %. TiTa shows laminar β grains in the random direction in both xy and yz-plane from optical microscope (OM) analysis. This measurement is further confirmed using X-ray diffraction (XRD) which indicate the presence of β phase, which consist of body centered cubic (BCC) structure. Throughout the SLM process, the titanium powder able to melt entirely due to the adequate amount of energy density applied but because of tantalum high melting point, several large tantalum particles melted partially.en_US
dc.format.extent73 p.en_US
dc.language.isoenen_US
dc.rightsNanyang Technological University
dc.subjectDRNTU::Engineering::Mechanical engineeringen_US
dc.titleEffect of processing parameters on microstructure of laser melted titanium alloysen_US
dc.typeFinal Year Project (FYP)en_US
dc.contributor.supervisorYeong Wai Yeeen_US
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen_US
dc.description.degreeBachelor of Engineering (Mechanical Engineering)en_US
item.grantfulltextrestricted-
item.fulltextWith Fulltext-
Appears in Collections:MAE Student Reports (FYP/IA/PA/PI)
Files in This Item:
File Description SizeFormat 
FYP.pdf
  Restricted Access
3.45 MBAdobe PDFView/Open

Page view(s)

353
Updated on Jul 21, 2024

Download(s) 50

40
Updated on Jul 21, 2024

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.