Please use this identifier to cite or link to this item:
Title: Performance testing of integrated BSTAR and ACMV system
Authors: Naw Thablay Thaw Ray
Keywords: DRNTU::Engineering::Electrical and electronic engineering
Issue Date: 2017
Abstract: Air-conditioning and mechanical ventilation (ACMV) system is commonly used in commercial building, hospital, university and factory. It consumes about 60% of the total energy consumption of a typical commercial building. One of the ways to reduce energy consumption of ACMV system is by integrating an efficient control system that can optimize the performance of the entire system and reduce the number of total operating units and save the energy. In this study, the pressure control system is designed by controlling the speed of the air handling unit (AHU) supply air fan. The model of the fan is analyzed by conducting open loop step test. The data are acquired using LabVIEW and the model is identified by using two-point method. After the model is obtained, the PID controller for the closed loop control system is designed using different tuning methods. The performances of the controllers are tested using MATLAB/Simulink and the suitable controller is used for the actual system. The control system will be implemented in ACMV system by using NI DAQ and LabVIEW Advanced PID. As it is important for the control system to reach and maintain the desired set point, the response of the system with various set points will be analyzed. The detail steps and results are described in this report.
Rights: Nanyang Technological University
Fulltext Permission: restricted
Fulltext Availability: With Fulltext
Appears in Collections:EEE Student Reports (FYP/IA/PA/PI)

Files in This Item:
File Description SizeFormat 
FYP Final Report.pdf
  Restricted Access
1.34 MBAdobe PDFView/Open

Page view(s) 50

checked on Oct 26, 2020

Download(s) 50

checked on Oct 26, 2020

Google ScholarTM


Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.