Please use this identifier to cite or link to this item:
|Title:||Non-destructive testing of metallic specimens using "C" scan ultrasonic procedures||Authors:||Sandeep Singh Jorah Singh||Keywords:||DRNTU::Engineering::Mechanical engineering||Issue Date:||2017||Abstract:||NDT of welds is mostly carried out by experienced human operators worldwide. These operators will often report differing results from each other. This is because defects will have complicated shapes and varying sizes and also particularly because defect signals are often confused with unwanted spurious signals. This project will analyse defect signals to determine the sizes and locations of the defects. The NDT techniques to be used will be penetrant, magnetic particle, and ultrasonics "B" and "C" scan. All "A" data is automately saved during these procedures and these can be analysed after the tests are completed. The weld specimens for this project all exist in NTU. Other specimens can be made by drilling holes into a material to simulate defects such as cracks. Crack shapes and sizes can be easily varied enabling the accuracy of sizing techniques like maximum amplitude and 20db drop to be investigated.||URI:||http://hdl.handle.net/10356/71971||Rights:||Nanyang Technological University||Fulltext Permission:||restricted||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MAE Student Reports (FYP/IA/PA/PI)|
Files in This Item:
|Sandeep Singh (U1421574A) - FYP Report (Final).pdf|
|NON-DESTRUCTIVE TESTING OF METALLIC SPECIMENS USING "C" SCAN ULTRASONIC PROCEDURES||4.51 MB||Adobe PDF||View/Open|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.